Construction:
Made from jewelry quality stainless steel, non-rusting, tested to MIL STD 202
Method 101
Thickness:
3.5mm, average weight 33 grams
Manufactured to 130mm circumference with 5 10mm nylon expansion l links
Electrical Properties:
Outer band: insulative at 500V per unit millimeter, coating is polyurethane
based polymer
Inner band: Conductive - <1.0x104
Quality Control:
Each band is date and lot coded to total quality control and auditing
Elasticity:
Expansion ratio 1.5:1
Snap/Size:
4mm post snap for ground cord, non rusting, tested to MIL STD 202 Method 101
Color:
Gray
Markings:
Prostat logo
Meets or exceeds:
DOD-HDBK-263, DOD-STD-1686, EOS/ESD Std. No. 1-1987, EN10015/1
UL Listed:
File E 157590
Cord Assembly
Resistor:
One megohm (±10%) resistor molded into snap connection
Ground Connection:
Standard banana plug
Warranty:
Warranted for One Year against mechanical and electrical defects.
Cord Extension:
Full extension greater than 13 feet; Working Length greater than 10 feet.
Tested:
Provides over 100,000 bending cycles per EOS/ESD-S1.0-1987 procedures.
WARNING:
A one megohm resistor has been molded into the plastic cap on the ground cord
fastener. DO NOT REMOVE. If it becomes damaged, replace ground cord immediately.
Do not use in areas where the individual may come in contact with electrical
circuits exceeding 250 volts.
CAUTION:
The Prostat wrist strap is for static control. It will not reduce or increase
your risk of receiving electrical shock when using or working on electrical
equipment. Follow the same procedures you would use without wrist straps, including:
* Make certain that equipment having a grounding type plug is properly grounded.
* Make certain that you are not in contact with grounded objects other than
through the strap.
Request a quote for the PWS-620 and receive it within 24 hours! Or speak with a Sales Representative at 630-238-8883.
