Grounding Set with Fabric Wrist Strap
- Includes the Triple Socket Grounding Cube
- Includes a 15 foot long Ground Cord
- Includes an adjustable Fabric Band Wrist Strap
- The Wrist Strap includes a 10 foot cord with 1 meg Ohm Resistor
- Recommended for use on tested electrical outlets
- Replaces expensive grounding blocks and circuit indicators
- Convenient connection for ESD grounding
- In accordance with En 100015/1, ANSI/ESD S1.1 and ANSI/ESD S6.1
Q007B Commong Point Ground Connector
The Prostat Qube™ replaces ordinary electrical grounding devices with a convenient, cost effective means to connect several ESD controls to a single grounded electrical outlet. Use the Q007B Qube™ to ground workstations, mats, wrist strap & testers, instruments, and other ESD control products to a pre-tested facility electrical ground. It consists of a robust multi receptacle frame encased in fire retardant ABS with a solid brass grounding pin.
PGC-015G Green Ground Cord
The Prostat PGC-015G is a 15 foot straight common point ground cord with two banana receptacles, in low profile housing for connecting two wrist straps. The PGC-015G includes one 1.0x106 (±20%) current limiting resistor molded in the snap housing, a low profile housing with a 10 mm male snap for easy connection to mat, a male banana plug for cord connection to ground.
The PGC-015G is made in accordance with IEC 61340-5-1, ANSI/ESD S20.20, ANSI/ESD S6.1.
PWS-610M Fabric Band Wrist Strap
The PWS-610M Fabric Band Wrist Strap is specially designed for durability, lightweight, portability and comfort.
These unique personnel and instrument grounding products are intended for use in demanding, high performance applications where reliability is the priority.
Compared to traditional wrist straps with fabric cuffs and 10 ft cords, the PWS-610M weighs 60 percent less (under 1 ounce) and uses 1/3 the working or storage space of a standard assembly. The PWS-610M series is so compact that it can be easily carried or stored in a pocket, mini audit kit, or small cabinet spaces.
Its knit, two way stretch fabric cuff is extremely comfortable and fully adjustable.
Q007B Common Point Ground Specifications
Physical Properties |
|
Material |
Fire Retardant ABS |
Configuration |
3 standard banana jack inputs, Brass Grounding Pin, 2 FR ABS Spades |
length |
2.12" (5.385 cm) |
Width |
0.9" (2.286 cm) |
Depth |
0.9" (2.286 cm) |
Weight |
2.4 oz (68 g) |
Color |
Green |
PGC-015G Green 15 Foot Ground Cord Specifications
Physical Properties |
|
length |
15 feet (4.6 meters) |
Ressitor |
One megohm (±10%) resistor molded into snap connection |
Color |
Green |
PWS-610B Fabric Cuff Assembly Specifications
General |
|
Buckle |
1.0W x 1.0L x 0.25H inches.
Gray, adjustable with positive lock, stainless steel back
plate. Standard male 5/32” snap (0.154 inch, 4mm); provides 360° performance.
Patented, easily adjusted buckle incorporating a positive fabric lock to eliminate slip
and enhance skin contact.
Non-sensitizing stainless steel back plate. |
Fabric |
0.85 inches wide.
Grey, knit incorporating silver plated fi lament and elastic nylon.
Insulative outer cuff surface, conductive inner cuff surface. |
Size/Length |
Nominal 6.5” after stretching to 2x length and relaxing. |
Adjustable |
Easily adjustable to fit all personnel. |
Quality Control |
Date coded and Prostat logo embossed on all cuff assemblies. |
Snap |
Incorporate a 10mm male snap and insulated snap cover installed in the fabric approximately 2 inches from the cuff buckle. The 10mm snap is used to mount and
ground the PFM-711A or PFM-711B Field Meters. |
PWS-610PGC Ground Cord Assembly Specifications
General |
|
Construction |
Heavy Duty, Lightweight construction of Single bundle |
Diameter |
2.5mm |
Resistor |
One megohm (±20%) resistor molded into snap connection |
Ground Connection |
Standard banana plug, 4mm female snap |
Cord Extension |
Working Length: 12 feet (3.66 meters) |
Bending Life Test |
Exceeds 20,000 cycles of bending life test without any physical damage on the strain relief |
Color |
Black |
Warnings |
A one-megohm resistor has been molded into the plastic cap on the ground cord fastener.
DO NOT REMOVE. If it becomes damaged, replace ground cord immediately. Do not use in areas where the individual may come in contact with electrical circuits exceeding 250 volts. |
The Prostat wrist strap is for static control. It will not reduce or increase your risk of receiving electrical shock when using or working on electrical equipment. Follow the same procedures you would use without wrist straps, including:
* Make certain that equipment having a grounding type plug is properly grounded.
* Make certain that you are not in contact with grounded objects other than through the strap. |